Thoughtful delivery service

Easy 30 day returns

Certified Reviews

Description

Tapped CapsAll ductile iron Tapped Caps have a FPT (female pipe thread) outlet. Gasket bell ends are designed to push on to IPS (iron pipe size) plastic pipe. The pipe end must be beveled and lubricated with gasket pipe lube before inserting into the gasket bell end. The vertical ears on the caps are designed to attach joint restraint products. The horizontal ears on the caps are designed to attach spigot end fittings such as SBR reducers or plugs. For more

All full port valve bodies are constructed of either ductile iron or stainless steel depending upon model

TheLB Series restraints eliminate the need for thrust blocking

The LF90 and LF180 LAT Adapters are designed to insert into a Lateral Tee or Lateral Saddle bell outlet

The torque wrench is used to achieve proper torque settings for products with bolts and nuts

Flanged end requires nuts

The gasket bell inlet and outlet is designed to push on to IPS (iron pipe size) HDPE plastic pipe

The L90 and L180 LAT Adapters are designed to insert into a Lateral Tee or Lateral Saddle bell outlet

Hole saw and pilot bit are used to drill out 1

The gasket bells of the tee are designed for IPS (iron pipe size) plastic pipe

All Stop Waste Valves are constructed of 316-series stainless steel

(see Lateral Connections section)

The horizontal ears on the adapter are designed to attach spigot end fittings such as SBR reducers or plugs